How Is The Speed Of Three-phase Induction Induction Motor Produced?

Jan 02, 2025

Leave a message

Formation and rotational speed of rotating magnetic field


When the stator winding of the three-phase induction induction motor is connected to the three-phase AC power supply, the rotating magnetic field will be generated. Because the three-phase AC currents differ from each other by 120° in time, the magnetic fields they generate in the stator windings also differ from each other by 120° in space and vary sinusoidal with time. According to the principle of electromagnetism, these three magnetic fields are superimposed on each other, which will create a rotating magnetic field inside the stator core.

 

The following rotation of the rotor and the actual speed


The rotating magnetic field cuts the rotor windings, and according to the law of electromagnetic induction, the induced electromotive force is generated in the rotor windings. Because the rotor winding is closed, an induced current is generated.


A rotor winding carrying an induced current is subjected to an electromagnetic force in a rotating magnetic field, which produces an electromagnetic torque that drives the rotor to rotate. The direction of rotation of the rotor is the same as that of the rotating magnetic field.


However, the speed of the rotor is always less than the synchronous speed of the rotating magnetic field, because if the rotor speed is equal to the synchronous speed, then there is no relative motion between the rotating magnetic field and the rotor, the rotor winding will not cut the magnetic force line, it will not produce induced electromotive force and induced current, and the motor will not be able to produce electromagnetic torque to maintain rotation.

 

What are the factors related to the speed of three-phase induction induction motor?

 

Power frequency


The synchronous speed of the three-phase induction induction motor (the theoretical rotation speed of the rotating magnetic field) is proportional to the frequency of the power supply.

 

The number of poles of the motor


The number of poles is inversely proportional to the synchronous speed. The number of poles of the motor is determined by the stator winding design of the motor.

 

Load torque


When the load torque of the motor changes, the speed of the motor will also change. During the operation of the motor, the slip rate will be automatically adjusted according to the size of the load torque to maintain the balance between electromagnetic torque and load torque.

 

Supply voltage


The variation of the power supply voltage will affect the electromagnetic torque of the motor. When the supply voltage is reduced, the electromagnetic torque will be reduced. If the load torque is unchanged, in order to balance the load torque, the slip rate will increase, and the actual speed of the motor will decrease; On the contrary, when the power supply voltage increases, the electromagnetic torque will increase, and the actual speed of the motor may increase. However, too much voltage change may cause damage to the motor.

 
Three phase induction motor
 

Specializing in the production of three-phase induction motor 100 years

4 Pole Ac Motor
Three phase induction motor
Variable Speed Ac Motor
Three phase induction motor
Permanent Magnet Synchronous Ac Motor
Three phase induction motor
18kw Motor
Three phase induction motor

 

 

Send Inquiry