русский 
عربي 
Español
Português
日本語
한국어
Français
Deutsch
ไทย
Indonesia
Việt Nam
Türkçe
O'zbek
简体中文
Italiano
Čeština
Eesti
Gaeilgenah Éireann
Bai Miaowen
íslenska
Cymraeg
Български
اردو
Polski
hrvatski
українська
bosanski
فارسی
Lietuvių
Latviešu
עברית
România limbi
Ελληνικά
dansk
magyar
Norsk
suomi
Nederlands
Svenska
slovenčina
slovenščina
हिंदी
Melayu
Malti
Kreyòl Ayisyen
Català
বাংলা
Srbija jezik (latinica)
Agriculture Water Pump Motor
agriculture water pump motor
Energy-saving design:
The agricultural water pump motor uses advanced energy-saving technology to optimize the use of electrical energy under different load conditions. Its efficient energy conversion rate allows the water pump to consume less electricity when running, while the output can maintain a steady water flow. This design not only helps to reduce the overall energy consumption of the farm, but also reduces carbon emissions, effectively supporting the development of green agriculture.
Waterproof and dustproof performance:
The motor has an excellent waterproof and dustproof design, suitable for operation in various harsh climate conditions. Its sealed structure prevents water and dust from entering the motor, thereby effectively protecting the motor components and extending its service life. This feature allows the motor to operate reliably in a variety of outdoor environments, especially suitable for wet and dusty agricultural sites.
High flow output:
The agricultural water pump motor is designed to provide high flow output, which can quickly extract and deliver large amounts of water in a short period of time. This feature is very suitable for large-scale irrigation or emergency water supply needs, ensuring that farmland can get enough water in time during the dry season, which helps to improve the speed and quality of crop growth.
High and low temperature working ability:
The motor design takes into account the temperature changes in the agricultural environment and has the ability to withstand high and low temperatures. Whether in the hot summer or the cold winter, it can maintain stable performance, ensuring that the irrigation system is not affected by seasonal changes. This tolerance makes it widely used in farms around the world.
Low noise operation:
Designed with full consideration of noise control, the agricultural water pump motor produces very low noise during operation, which is especially important for farms close to residential areas. The low noise feature not only improves the comfort of the working environment, but also reduces the impact on the surrounding community, so that farmers will not disturb their neighbors when irrigating.
Technical Specifications
| Specification | Description |
| Power Rating | 1 HP to 10 HP |
| Voltage | 115V/230V (Single-phase) or 380V (Three-phase) |
| Frequency | 50 Hz / 60 Hz |
| Efficiency | ≥ 80% |
| Insulation Class | Class F (155°C) or Class B (130°C) |
| Protection Rating | IP55 (Dust-tight and water-resistant) |
| Speed | 1500 RPM / 3000 RPM |
| Starting Method | Direct-on-line or Star-delta |
| Mounting Type | Foot-mounted or flange-mounted |
| Weight | Varies by model, typically 20 kg - 80 kg |
| Dimensions (L x W x H) | Varies by model; standard sizes available |
| Cooling Method | Self-ventilated or external cooling |
| Operating Temperature | -10°C to 40°C |
| Noise Level | ≤ 75 dB (A) |
| Warranty Period | 1 year or as specified by manufacturer |
| Certifications | CE, UL, or ISO 9001 (varies by manufacturer) |
Application areas of this product
Irrigation system:
Agricultural pump motors play a vital role in modern agriculture, especially in the application of various irrigation systems. They are widely used in different irrigation methods such as drip irrigation, sprinkler irrigation and furrow irrigation to provide stable water flow and pressure for farmland. In drip irrigation system, the motor can deliver water directly to the roots of plants at a precise flow rate, avoiding water waste and reducing the risk of soil erosion. Sprinkler irrigation system ensures that the soil is evenly wetted by atomizing water droplets, thereby improving the soil's water retention capacity and reducing the impact of drought on crop growth. In addition, in furrow irrigation system, the efficient operation of the motor ensures the rapid distribution of irrigation water, allowing farmers to cover a large area of farmland in a short time, thereby improving the overall growth efficiency and yield of crops.
Water supply and drainage management:
In addition to irrigation, agricultural pump motors also play an important role in water supply and drainage management. They are able to draw water from water sources such as wells, rivers or reservoirs to provide necessary water resources for farmland in arid areas. Especially in seasons with a lack of natural precipitation, the motor can continuously supply water to ensure that crops will not be affected by water shortage during their growth. At the same time, farmland may face the problem of water accumulation during the rainy season or after irrigation. The water pump driven by the motor can effectively remove excess water and prevent plant root rot, thereby protecting the soil structure and crop health. Through reasonable water source management and drainage measures, farmers can better control water, improve soil fertility, and promote high yield and high-quality development of crops. These functions make agricultural water pump motors an indispensable equipment in modern agricultural production and promote the sustainable development of agriculture.
Installation Method:
| Structure and installation type (IM code)) |
IM B3 | IM B8 | IM B5 | IM B6 | IM V5 | IM V1 | IM B7 | IM V6 | IM V3 |
| Installation diagram |  |
 |
 |
 |
 |
 |
 |
 |
 |
| Frame size | 63-450 | 63-160 | 63-280 | 63-160 | 63-160 | 63-450 | 63-160 | 63-160 | 63-160 |
| Structure and installation type (IM code)) |
IM V37 | IM V17 | IM B34 | IM V19 | IM V18 | IM B14 | IM V35 | IM V15 | IM B35 |
| Installation diagram |  |
 |
 |
 |
 |
 |
 |
 |
 |
| Frame size | 63-132 | 63-13 | 63-132 | 63-132 | 63-132 | 63-132 | 63-160 | 63-160 | 63-450 |
FAQ
Question 1: What is the energy efficiency rating of this motor?
Answer: The energy efficiency rating of the device is usually a high-efficiency standard that optimizes the use of electrical energy under different load conditions. The high-efficiency motor design ensures that less electricity is consumed during operation, allowing users to significantly reduce long-term operating costs. In addition, lower energy consumption also means reduced carbon emissions, which is also a major contribution to environmental protection.
Question 2: What is the operating temperature range of this motor?
Answer: This motor typically has an operating temperature range of -10°C to 40°C and is capable of reliable operation in a variety of climate conditions. The motor maintains stable performance even in extreme high or low temperature environments. This tolerance makes it suitable for use in a variety of agricultural environments, from arid regions to humid climates.
Question 3: What are the maintenance requirements for the product? Is it expensive to maintain?
Answer: The maintenance requirements of this equipment are relatively low. Regularly checking your motor's lubrication system and cleaning its vents can extend its service life. Normally, regular maintenance and inspection can ensure the normal operation of the motor. Therefore, maintenance costs are relatively low, and users can focus more on production rather than equipment maintenance.
Question 4: What types of water sources is this motor suitable for? Can water be pumped from a deep well?
Answer: This motor is suitable for a variety of water sources, including shallow wells, deep wells, lakes and reservoirs, etc. Depending on the model, some motors are specially designed for pumping water from deep wells and have sufficient head and water suction capacity to ensure efficient operation even when the water level is low.
Question 5: What is the noise level of this device? Will it affect crop growth when used in agricultural settings?
Answer: This motor is designed with noise control in mind. Its noise level usually does not exceed 75 dB (A) and has very little impact on the surroundings when operating in an agricultural environment. The lower noise level allows users to perform irrigation operations without disturbing the surrounding environment and without negatively affecting crop growth.
Question 6: Can it be integrated with automation systems? Does it support remote monitoring?
Answer: Yes, this motor supports integration with various automation systems, enabling remote monitoring and control functions. Users can monitor the operating status of the motor at any time through a mobile phone or computer and make corresponding adjustments, which facilitates the implementation of smart agriculture and ensures the rational use of water resources.
Question 7: What is the approximate service life of this motor? Is there a relevant warranty policy?
Answer: With normal use and maintenance, the service life of this motor can usually reach 10 years or more. Most manufacturers also offer at least a one-year warranty that covers defects in materials and workmanship, ensuring users have some protection and peace of mind during use.
Hot Tags: agriculture water pump motor, China agriculture water pump motor manufacturers, suppliers, factory, synchronous machine, low voltage electric motor, the universal motor, multi speed motor, a reluctance motor, standard motors
You Might Also Like
Send Inquiry