ZJJ800 DC Motor

The ZZJ-800 series motor is a high-power DC motor for metallurgical lifting purposes, suitable for steel rolling mills, cranes, elevators and electric shovels.

The frame adopts a thin plate polygonal laminated structure, which is small in volume and light in weight. The stator and rotor are treated with vacuum pressure impregnation (VPI), featuring excellent insulation and conductivity.
1. Standard rated voltage: 220V, 440V.
2. Rated speed: 1025, 900, 800, 725, 650, 550 r/min, etc.
3. Protection characteristics: IP23S, IP44.
4. Installation methods: IC01, IC06, IC17, IC37 and ICW37A86
5. Insulation class: F class
6. The data listed in the technical data sheet shall be under the following conditions:
a. Altitude not exceeding 1000 meters;
b. Ambient air temperature ranging from -30℃ to 40℃;
c. The working environment shall be free of acidic, alkaline or other gases corrosive to insulation, and shall not contain explosive or flammable gases.
d. Continuous duty: SI; S2; S3.

Feature And Uses

ZZJ-800 motors are a kind of DC motors used for metallurgy & hoisting, available for steel rolling machine, crane, elevator and electric excavator etc. The motors have lower moment of inertia(GD),higher overload capacity,and quicker speed response so that it is possible to undergo frequent starting, braking, and repeated change of direction of rotation. Moreover, the motors are reliable, perform well in speed regulating, and can be operated suitably on thyristor continue rolled supplies.

The sturdy unitary round frame structure is highly resistant to shock impact.All the windings are vacuum pressure impregnated with class F insulation, to form an integral construction with the laminated cores,ensuring high dielectric stability and excellent heat dissipation.Besides,the connection between armature winding and segment risers is employed by TIG welding (inert gas tungsten are welding), thereby improving the electromechanical reliability. Basic type of construction is horizontal foot-mounted and 2 shaft-end's which are 1:10 tapered. Terminal box is located at the right side of motor viewed from motor viewed from the main drive end.

Rating,performance and outline mounting dimension all conform to the standard of IEC publication 34-13 (edition 1980) "pecification for mill auxiliary motor", and national standard GB5227 "Specification for mill auxiliary D.C motor" Modes of protection and cooling have 6 kinds: 1.Totally enclosed,self-cooling.IP44,IC410 2.Drip-proof,force ventilated with built-on blower.IP23S,IC06 3.Drip-proof,single pipe ventilated.IP23S,IC17 4.Totally enclosed,double pipes ventilated.IP44,IC37 5.Drip-proof, self-ventilated.IP23S,IC01 6.Totally enclosed,force ventilated with air-to-water heat exchanger.IP44,ICW37A86(only for ZZJ804-818).It many also be made into other different types on request.